Hubei Fotma Machinery Co., Ltd.
Hubei Fotma Machinery Co., Ltd. Tungsten, Molybdenum, Titanium, Tungsten Carbide and Investment Casting Products
Add to Cart
Mo1 99.95% Molybdenum Plate Moly Foils Annealed For Furnace Heating Elements
Molybdenum foils from 0.005 inches to 0.150 inches in thickness is classified as molybdenum refractory sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.
Molybdenum sheets from 0.187 inches to 3 inches in thickness is classified as Molybdenum refractory plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries.
Moly Foils Features:
Purity: >=99.95%
Density: >=10.1g/cm3
Thickness: >=0.05mm
Width: 20-600mm
Length: Less than 2000mm
Grade: Mo1, TZM, Mo-La
Standard: ASTM, GB3876-83
Surface: Hot rolls, bright, ground
Size Chart of Molybdenum Foils We Supply:
| Thickness(mm) | Tolerances(mm) | Width(mm) | Tolerances(mm) | Length(mm) | Tolerances(mm) |
| 0.1mm | ±0.01 | 600mm | ±1mm | 2000mm | ±5mm |
| 0.2mm | ±0.02 | 600mm | ±1mm | 2000mm | ±5mm |
| 0.3mm | ±0.02 | 600mm | ±1mm | 2000mm | ±5mm |
| 0.4mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm |
| 0.5mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm |
| 0.8mm | ±0.05 | 600mm | ±1mm | 2000mm | ±5mm |
| 1mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm |
| 1.5mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm |
| 2mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm |
| 3mm | ±0.2 | 500 | ±1mm | 500 | ±2mm |
| 4mm | ±0.2 | 500 | ±1mm | 500 | ±2mm |
Chemical Composition of Pure Molybdenum:
| Test Result of pure molybdenum strips | |||||
| Fe | Ni | Ca | Mg | Al | Cu |
| 0.001 | 0.0033 | 0.0012 | 0.0022 | 0.00048 | 0.00075 |
| Pb | Bi | Cd | Sb | P | O |
| < 0.0001 | < 0.0001 | < 0.0001 | < 0.0001 | < 0.0001 | 0.033 |
| C | Mo |
|
|
|
|
| 0.003 | > 99.95% |
|
|
|
|
Product show:
